Computerized Tensile (Compression) Testing Machine | QC-548M2F(5kN)

Home / Products / Tensile Testing Machine / Computerized Tensile (compression) testing machine
Product Serial : QC-548M2F(5kN)
Computerized Tensile (compression) testing machine
Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

QC-548M2F table type Max. Capacity 5kNprovided the quiet testing environment and high accuracy test result. Stand-alone mode for tensile test, compression test, bending test and all kind of testand maintenance-free of servo drive system.
The machine has single-separated electric control box, separate electronic control system to avoid interference with the transmission components to increase test stability and also conducive to the maintenance and updating of electronic systems.
Support precision jog-wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. High-speed signal feedback mechanism can reduce the chance of machine overload. The reserved external signal can be connected to an external signal source, increasing machine control mode.

Industry:Rubber, Plastic, Paper, Textile, metal, wood, tape, electron, package, Medical, Architecture

Model QC-548M2F QC-548M2F with extend height
Max. Capacity 5 kN 2kN

Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force Resolution 31 bits
Force Precision 1/100,000
Test stroke(w/o grip) 800 mm 1100 mm
Stroke resolution 0.0001mm
Cantilever distance 75 mm
Speed range 0.0002 ~ 1000 mm/min (adjustable)
Speed precision High speed mode
0.05~ 1000 mm/min
Low speed mode
0.0002 ~ 4 mm/min
PC-Port RJ45(TCP/IP)
Data Sampling Maximum1200 Hz
Motor type Servo Motor

※Automatic reading of load cell information
※Automatic reading of displacement sensor information
※Force display, displacement display, time display, stress display and strain display
※External analog input (reading of voltage or current at the same time via two channels)
※Force zeroed automatically
※Force calibration based on user’s preference
※Breaking point detection
※Automatic return
※Overload protection

Power Supply Single phase 200 ~ 240VAC,5A
Dimension of Machine 50× 53 × 145 cm 50× 53 × 180 cm
Weight of Machine 80 kg 95 kg

(1) Displayer

1. Adopted with 7- inch of TFT Color touch screen
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7.Various machine shutdown conditions setting (force, displacement, time, elongation).
8.Can be restored to the original factory state.
9.Unit selection can be Metric unit, Imperial units
10.Over-travel, overload protection and overtime machine stop
11.Can store up to 50 data, USB storage data function.
12.Support multiple sets of signal sources.


(2) Extensometer

1.QC-557 Short extensometer, which is apply in under 50% of elongation tests.

QC-557   QC-515


2.QC-551 Long extensometer, which is apply in over 20% of elongation tests.

1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
(1)Software interface (2)Report

*Cometech reserves ultimate modification right of product specification.