QC-508M1F & 513M1F (5kN)

Home / Products / Tensile Testing Machine / Computerized Tensile (compression) testing machine
Product Serial : QC-508M1F & 513M1F (5kN)
Computerized Tensile (compression) testing machine
Confirm to ISO 7500-1, ASTM E4, ASTM D-76, DIN5122, JIS B7721/B7733, EN 1002-2, BS1610, GB T228 Standard

The table type tensile (compression) testing machine has great configurations of volume planning and operation. With servo motor and sophisticated ball screw which is suitable for under 5KN test. Standard equipped with sophisticated hand wheel which can be in precision and it convenience to calibration and adjust displacement. According to the length of specimen and the elongation have different stroke for optional. Also, we provide completed fixture planning which can proceeding variety of test method. This model is using special testing software M1F which is used Windows 7/8 /10 of Person computer. It can do tensile test, compression test, bending test, peeling test, hold tensile (compression) and all kind of test. The software with multi-languages is very easy to operation. It also has all kind of metric units, real-time graphs and also provides complete analysis test data which can do variety of material analysis or storage after finished test. Multiple control systems can choose special displayer, M1F, without connect computer (stand-alone) that can capture fast and effective test data.

Industry:Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electronics, Packaging, Medical, Architecture.


Model QC-508M1F QC-513M1F
Max. Capacity 5 kN
Units Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force Resolution 31 bits
Force Precision 1/100,000
Test stroke(w/o grip) 800mm 400mm
Stroke resolution 0.0001mm
Space between columns Ø70mm
Speed range 0.2 ~ 1000mm/min
(Can be set by computer digital)
PC-Port RJ45(TCP/IP)[software optional]
Data sampling rate Max.400Hz
Motor type Servo Motor
Feature ※Automatic reading of load cell feature information
※Automatic reading ofdisplacement sensor feature information
※force display, displacement display, time display, stress display and strain display
※External analog input (2-channel simultaneous reading of voltage or current)
※Test force automatically zero
※Test force self-defined calibration
※Break detection
※Automatic return
※Force overload protection
Power Supply Single phase 200 ~ 240VAC,5A
Dimension of Machine 50× 53 × 145cm 50 x 53x 100cm
Weightof Machine 80 kg 65 kg


(1) Displayer

1. Adopted with 7- inch of TFT Color touch screen.
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time.
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8. Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10. Over-travel, overload protection and overtime machine stop.
11. Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.


(2) Extensometer

QC-557 Short extensometer which
is applied in under 50% of elongation test.
  QC-551 Long extensometer which
is applied in over 20% of elongation test.


1. Data sample rate faster can be set up to 400Hz
2. Operation method: By keyboard and mouse control test, can also through up and down button to adjust the fixture position
3. Compatible with Window 7 /8 /10 system
4. Software has multi-languages with Chinese, English, Japanese, Korean, Spanish and Polish display.
5. Operating mode: TCP/IP interface, two-way transmission, the computer directly control the machine action
6. Can import multiple test data display simultaneously
7. Unit selection can be Metric unit and Imperial units.
8. Form flexibility, self-planning information analysis .
9. Data name can be self-set and can self-defined formula
10. Test Screen can be selected data display, graphic display or simultaneous display.
11. Data processing: store, call, list, statistical comparison, etc..
12. Graph X-Y axis physical quantity adjustment, graph-specific mark, interval mark, slope and son on.
13. Test tensile, compression, bending, peeling, spring and other tests.
14. Software protection: Overload, over -displacement, over-time protection.
15. Variety of test actions, Ex. hold tensile (compression), 10 grades of the actions.
16. Modularization of specimen setting, providing easy to set specimen.
17. Modularization of test conditions to reduce artificial setting negligence and error.
18. Key data capture, can set the upper and lower limits of test data specifications.
19. Support multiple sets of I / O signals, increase testing mechanism.

(1)Software interface (2)Report

*Cometech reserves ultimate modification right of product specification.