PSTC Tape Initial Adhesion Tester

Главная / Продукты / Ленты / PSTC Tape Initial Adhesion Tester
No модели : QC-805P
PSTC Tape Initial Adhesion Tester
Confirm to PSTC-6 Standard

Before test, use solvent clean runway and steel ball surface, stick width 1 inch x length 15inch’s tape in the front of runway, use clean and dry clip, put steel ball above release bar, release steel ball to let it roll directly through until stop on the specimen and then measure distance, getting average value after five times tests.

 

Industry: Tape

Model QC-805P
Slope angle 21.3°
Ball diameter Φ7/16 inch × 3
Φ7/32 inch × 5
Slope length 6.5 inch
Dimension 23 × 6 × 7 cm
Weight 800 g

 

Test Video         Teaching material SOP        Test Case

  • QC-801 Tape Holding Power Tester (Normal Type)
  • QC-802 Tape Holding Power Tester (Heating Type)
  • QC-803A Manual Roller
  • QC-803J Motor Roller (With speed setting function)
  • QC-803K Motor Roller
  • QC-805 Tape Initial Adhesion Tester
  • QC-508M1 Computerized Material Testing Machine (Tape Peeling Tester)
Related Products